Get Media Health Monitoring Tool Test results for node V2
Returns the test results of the Media Health Monitoring Tool tests for a single Video Mesh node.
Changes in V2:
On-demand test results can be obtained along with the periodic tests that are executed on Video Mesh nodes.
GET/v1/videoMesh/testResults/mediaHealthMonitorTest/nodes
Query Parameters
nodeId
stringrequired
Unique ID of the Video Mesh node.
from
stringrequired
The start date and time of the requested data in any ISO 8601 compliant format. The from parameter cannot have date and time values that exceed to.
to
stringrequired
The end date and time of the requested data in any ISO 8601 compliant format.
triggerType
stringrequired
Trigger type.
Possible values: OnDemand, Periodic, All
Response Properties
orgId
string
Unique ID of the organization.
from
string
Start date and time (inclusive) of the Media Health Monitoring Tool data.
to
string
End date and time (inclusive) of the Media Health Monitoring Tool data.
items
array[Per node Media Health Monitoring clusters]
Media Health Monitoring Tool test results.
clusters
array[Per node Media Health Monitoring result]
The list of Video Mesh clusters.
clusterId
string
Unique ID of the Video Mesh cluster.
clusterName
string
Name of the Video Mesh cluster.
nodes
array[Media Health Monitoring first node]
The Video Mesh nodes in the cluster.
nodeId
string
Unique ID of the Video Mesh node.
hostNameOrIP
string
Host name or IP Address of the Video Mesh node.
mhmTestResults
array[Media Health Monitoring Test Results Failure]
The Media Health Monitoring Tool test results for a single Video Mesh node.
timestamp
string
The timestamp of the test run.
id
string
Unique ID of the test.
testResults
array[Media Signalling testResult Failure]
Test results of Media Signalling, SIP Signalling, Media Cascade runs.
testName
string
The name of the test.
testResult
string
Test results(Success/Failed).
failureReason
string
Reason for test failure.
Response Codes
The list below describes the common success and error responses you should expect from the API.
| Code | Status | Description |
|---|---|---|
| 200 | OK | Successful request with body content. |
| 201 | Created | The request has succeeded and has led to the creation of a resource. |
| 202 | Accepted | The request has been accepted for processing. |
| 204 | No Content | Successful request without body content. |
| 400 | Bad Request | The request was invalid or cannot be otherwise served. An accompanying error message will explain further. |
| 401 | Unauthorized | Authentication credentials were missing or incorrect. |
| 403 | Forbidden | The request is understood, but it has been refused or access is not allowed. |
| 404 | Not Found | The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method. |
| 405 | Method Not Allowed | The request was made to a resource using an HTTP request method that is not supported. |
| 409 | Conflict | The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once. |
| 410 | Gone | The requested resource is no longer available. |
| 415 | Unsupported Media Type | The request was made to a resource without specifying a media type or used a media type that is not supported. |
| 423 | Locked | The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again. |
| 428 | Precondition Required | File(s) cannot be scanned for malware and need to be force downloaded. |
| 429 | Too Many Requests | Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made. |
| 500 | Internal Server Error | Something went wrong on the server. If the issue persists, feel free to contact the Webex Developer Support team. |
| 502 | Bad Gateway | The server received an invalid response from an upstream server while processing the request. Try again later. |
| 503 | Service Unavailable | Server is overloaded with requests. Try again later. |
| 504 | Gateway Timeout | An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it. |
GET
/v1/videoMesh/testResults/mediaHealthMonitorTest/nodes{?nodeId,triggerType,from,to}
Log in to try the API.
Header
Query Parameters
- Unique ID of the Video Mesh node.
- The start date and time of the requested data in any [ISO 8601](https://en.wikipedia.org/wiki/ISO_8601) compliant format. The `from` parameter cannot have date and time values that exceed `to`.
- The end date and time of the requested data in any [ISO 8601](https://en.wikipedia.org/wiki/ISO_8601) compliant format.
- Trigger type.
https://webexapis.com/v1/videoMesh/testResults/mediaHealthMonitorTest/nodes?nodeId=Y2lzY29zcGFyazovL3VzL0hZQlJJRF9DT05ORUNUT1IvMmMzYzlmOTUtNzNkOS00NDYwLWE2NjgtMDQ3MTYyZmYxYmFkOjE1NmRmNzg5Yzg1NTRkNTVhMjc1ZGY5OTc4Zjk5MDJk&from=2023-01-15T15:53:00Z&to=2023-01-20T15:53:00Z&triggerType=%5Bobject%20Object%5D,%5Bobject%20Object%5D,%5Bobject%20Object%5D
200 / OK
{
"orgId": "Y2lzY29zcGFyazovL3VzL09SR0FOSVpBVElPTi8yYzNjOWY5NS03M2Q5LTQ0NjAtYTY2OC0wNDcxNjJmZjFiYWQ=",
"from": "2023-01-15T15:53:00Z",
"to": "2023-01-20T15:53:00Z",
"items": [
{
"clusters": [
{
"clusterId": "Y2lzY29zcGFyazovL3VzL0hZQlJJRF9DTFVTVEVSLzJjM2M5Zjk1LTczZDktNDQ2MC1hNjY4LTA0NzE2MmZmMWJhZDpmMWJmMGI1MC0yMDUyLTQ3ZmUtYjg3ZC01MTFjMmZlNzQ3MWI=",
"clusterName": "sanjose",
"nodes": [
{
"nodeId": "Y2lzY29zcGFyazovL3VzL0hZQlJJRF9DT05ORUNUT1IvMmMzYzlmOTUtNzNkOS00NDYwLWE2NjgtMDQ3MTYyZmYxYmFkOjE1NmRmNzg5Yzg1NTRkNTVhMjc1ZGY5OTc4Zjk5MDJk",
"hostNameOrIP": "xyz.company.com",
"mhmTestResults": [
{
"timestamp": "2022-03-15T15:53:00Z",
"id": "Y2lzY29zcGFyazovL3VzL0hZQlJJRF9DT01NQU5EX0lELzJjM2M5ZjllLTczZDktNDQ2MC1hNjY4LTA0NzE2MmZmMWJhYzo2NTJmNmMxMC01NjgxLTExZWQtOTkyZS1kNTY5YzlkMDlhNzU",
"testResults": [
{
"testName": "Media Signalling",
"testResult": "Failed",
"failureReason": "An internal error occurred in monitoring tool [Error Code:1003]. If the issue persists, please contact Cisco Support."
},
{
"testName": "Media Cascade",
"testResult": "Failed",
"failureReason": "An internal error occurred in monitoring tool [Error Code:1004]. If the issue persists, please contact Cisco Support."
},
{
"testName": "SIP Signalling",
"testResult": "Failed",
"failureReason": "An internal error occurred in monitoring tool [Error Code:1002]. If the issue persists, please contact Cisco Support."
}
]
},
{
"timestamp": "2022-03-15T15:53:00Z",
"id": "Y2lzY29zcGFyazovL3VzL0hZQlJJRF9DT01NQU5EX0lELzJjM2M5ZjllLTczZDktNDQ2MC1hNjY4LTA0NzE2MmZmMWJhYzo2NTJmNmMxMC01NjgxLTExZWQtOTkyZS1kNTY5YzlkMDlhNzU",
"testResults": [
{
"testName": "Media Signalling",
"testResult": "Success"
},
{
"testName": "Media Cascade",
"testResult": "Success"
},
{
"testName": "SIP Signalling",
"testResult": "Success"
}
]
}
]
}
]
}
]
}
]
}