Get Room Details
Shows details for a room, by ID.
The title of the room for 1:1 rooms will be the display name of the other person. When a Compliance Officer lists 1:1 rooms, the "other" person cannot be determined. This means that the room's title may not be filled in and instead shows "Empty Title". Please use the memberships API to list the other person in the space.
Specify the room ID in the roomId parameter in the URI.
URI Parameters
The unique identifier for the room.
Response Properties
A unique identifier for the room.
A user-friendly name for the room.
The room type.
1:1 room.
Group room.
Whether the room is moderated (locked) or not.
The ID for the team with which this room is associated.
The date and time of the room's last activity.
The ID of the person who created this room.
The date and time the room was created.
The ID of the organization which owns this room. See Webex Data in the Compliance Guide for more information.
Space classification ID represents the space's current classification. It can be attached during space creation time, and can be modified at the request of an authorized user.
Indicates when a space is in Announcement Mode where only moderators can post messages
A compliance officer can set a direct room as read-only, which will disallow any new information exchanges in this space, while maintaing historical data.
The room is public and therefore discoverable within the org. Anyone can find and join that room.
Date and time when the room was made public.
The description of the space.
Response Codes
The list below describes the common success and error responses you should expect from the API:
| Code | Status | Description |
|---|---|---|
| 200 | OK | Successful request with body content. |
| 201 | Created | The request has succeeded and has led to the creation of a resource. |
| 202 | Accepted | The request has been accepted for processing. |
| 204 | No Content | Successful request without body content. |
| 400 | Bad Request | The request was invalid or cannot be otherwise served. An accompanying error message will explain further. |
| 401 | Unauthorized | Authentication credentials were missing or incorrect. |
| 403 | Forbidden | The request is understood, but it has been refused or access is not allowed. |
| 404 | Not Found | The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method. |
| 405 | Method Not Allowed | The request was made to a resource using an HTTP request method that is not supported. |
| 409 | Conflict | The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once. |
| 410 | Gone | The requested resource is no longer available. |
| 415 | Unsupported Media Type | The request was made to a resource without specifying a media type or used a media type that is not supported. |
| 423 | Locked | The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again. |
| 428 | Precondition Required | File(s) cannot be scanned for malware and need to be force downloaded. |
| 429 | Too Many Requests | Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made. |
| 500 | Internal Server Error | Something went wrong on the server. If the issue persists, feel free to contact the Webex Developer Support team. |
| 502 | Bad Gateway | The server received an invalid response from an upstream server while processing the request. Try again later. |
| 503 | Service Unavailable | Server is overloaded with requests. Try again later. |
| 504 | Gateway Timeout | An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it. |
Header
{
"id": "Y2lzY29zcGFyazovL3VzL1JPT00vYmJjZWIxYWQtNDNmMS0zYjU4LTkxNDctZjE0YmIwYzRkMTU0",
"title": "Project Unicorn - Sprint 0",
"type": "group",
"isLocked": true,
"teamId": "Y2lzY29zcGFyazovL3VzL1JPT00vNjRlNDVhZTAtYzQ2Yi0xMWU1LTlkZjktMGQ0MWUzNDIxOTcz",
"lastActivity": "2016-04-21T19:12:48.920Z",
"creatorId": "Y2lzY29zcGFyazovL3VzL1BFT1BMRS9mNWIzNjE4Ny1jOGRkLTQ3MjctOGIyZi1mOWM0NDdmMjkwNDY",
"created": "2016-04-21T19:01:55.966Z",
"ownerId": "Y2lzY29zcGFyazovL3VzL09SR0FOSVpBVElPTi85NmFiYzJhYS0zZGNjLTExZTUtYTE1Mi1mZTM0ODE5Y2RjOWE",
"classificationId": "Y2lzY29zcGFyazovL3VzL0NMQVNTSUZJQ0FUSU9OL2YyMDUyZTgyLTU0ZjgtMTFlYS1hMmUzLTJlNzI4Y2U4ODEyNQ",
"isAnnouncementOnly": false,
"isReadOnly": false,
"isPublic": true,
"madePublic": "2022-10-10T17:24:19.388Z",
"description": "Company Announcements"
}