Get Device Details
Shows details for a device, by ID.
Specify the device ID in the deviceId parameter in the URI.
URI Parameters
A unique identifier for the device.
Response Properties
A unique identifier for the device.
A friendly name for the device.
The place associated with the device.
The person associated with the device.
The organization associated with the device.
The capabilities of the device.
The permissions the user has for this device. For example, xapi means this user is entitled to using the xapi against this device.
The connection status of the device.
The product name.
Tags assigned to the device.
The current IP address of the device.
The current network connectivty for the device.
The unique address for the network adapter.
The primary SIP address to dial this device.
All SIP addresses to dial this device.
Serial number for the device.
The operating system name data and version tag.
The upgrade channel the device is assigned to.
The date and time that the device was registered, in ISO8601 format.
Response Codes
The list below describes the common success and error responses you should expect from the API.
| Code | Status | Description |
|---|---|---|
| 200 | OK | Successful request with body content. |
| 204 | No Content | Successful request without body content. |
| 400 | Bad Request | The request was invalid or cannot be otherwise served. An accompanying error message will explain further. |
| 401 | Unauthorized | Authentication credentials were missing or incorrect. |
| 403 | Forbidden | The request is understood, but it has been refused or access is not allowed. |
| 404 | Not Found | The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method. |
| 405 | Method Not Allowed | The request was made to a resource using an HTTP request method that is not supported. |
| 409 | Conflict | The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once. |
| 410 | Gone | The requested resource is no longer available. |
| 415 | Unsupported Media Type | The request was made to a resource without specifying a media type or used a media type that is not supported. |
| 423 | Locked | The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again. |
| 429 | Too Many Requests | Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made. |
| 500 | Internal Server Error | Something went wrong on the server. If the issue persists, feel free to contact the Webex Developer Support team. |
| 502 | Bad Gateway | The server received an invalid response from an upstream server while processing the request. Try again later. |
| 503 | Service Unavailable | Server is overloaded with requests. Try again later. |
Header
{
"id": "Y2lzY29zcGFyazovL3VzL0RFVklDRVMvNTEwMUIwN0ItNEY4Ri00RUY3LUI1NjUtREIxOUM3QjcyM0Y3",
"displayName": "SFO12-3-PanHandle",
"placeId": "Y2lzY29zcGFyazovL3VzL1BFT1BMRS83MTZlOWQxYy1jYTQ0LTRmZWQtOGZjYS05ZGY0YjRmNDE3ZjU",
"personId": "Y2lzY29zcGFyazovL3VzL1BFT1BMRS83MTZlOWQxYy1jYTQ0LTRmZWQtOGZjYS05ZGY0YjRmNDE3ZjU",
"orgId": "Y2lzY29zcGFyazovL3VzL09SR0FOSVpBVElPTi85NmFiYzJhYS0zZGNjLTExZTUtYTE1Mi1mZTM0ODE5Y2RjOWE",
"capabilities": [
{}
],
"permissions": [
{}
],
"connectionStatus": "connected",
"product": "Cisco Webex DX80",
"tags": [
"First Tag",
"Second Tag"
],
"ip": "100.110.120.130",
"activeInterface": "wired",
"mac": "11:22:33:44:AA:FF",
"primarySipUrl": "sample_device@sample_placename.orgname.org",
"sipUrls": [
"sample_device@sample_placename.orgname.org",
"another_device@sample_placename.orgname.org"
],
"serial": "FOC1923NVVN",
"software": "RoomOS 2018-06-01 608dcdbb6e1",
"upgradeChannel": "beta",
"created": "2016-04-21T17:00:00.000Z"
}