Read the DECT device type list
Not supported for Webex for Government (FedRAMP).
Get DECT device type list with base stations and line ports supported count. This is a static list.
Retrieving this list requires a full or read-only administrator auth token with a scope of spark-admin:telephony_config_read.
GET/v1/telephony/config/devices/dectNetworks/supportedDevices
Query Parameters
orgId
string
Response Properties
devices
array[DectDeviceList]
Contains a list of devices.
model
string
Model name of the device.
displayName
string
Display name of the device.
numberOfBaseStations
number
Indicates number of base stations.
numberOfLinePorts
number
Indicates number of port lines,
numberOfRegistrationsSupported
number
Indicates number of supported registrations.
Response Codes
The list below describes the common success and error responses you should expect from the API.
| Code | Status | Description |
|---|---|---|
| 200 | OK | Successful request with body content. |
| 201 | Created | The request has succeeded and has led to the creation of a resource. |
| 202 | Accepted | The request has been accepted for processing. |
| 204 | No Content | Successful request without body content. |
| 400 | Bad Request | The request was invalid or cannot be otherwise served. An accompanying error message will explain further. |
| 401 | Unauthorized | Authentication credentials were missing or incorrect. |
| 403 | Forbidden | The request is understood, but it has been refused or access is not allowed. |
| 404 | Not Found | The URI requested is invalid or the resource requested, such as a user, does not exist. Also returned when the requested format is not supported by the requested method. |
| 405 | Method Not Allowed | The request was made to a resource using an HTTP request method that is not supported. |
| 409 | Conflict | The request could not be processed because it conflicts with some established rule of the system. For example, a person may not be added to a room more than once. |
| 410 | Gone | The requested resource is no longer available. |
| 415 | Unsupported Media Type | The request was made to a resource without specifying a media type or used a media type that is not supported. |
| 423 | Locked | The requested resource is temporarily unavailable. A Retry-After header may be present that specifies how many seconds you need to wait before attempting the request again. |
| 428 | Precondition Required | File(s) cannot be scanned for malware and need to be force downloaded. |
| 429 | Too Many Requests | Too many requests have been sent in a given amount of time and the request has been rate limited. A Retry-After header should be present that specifies how many seconds you need to wait before a successful request can be made. |
| 500 | Internal Server Error | Something went wrong on the server. If the issue persists, feel free to contact the Webex Developer Support team. |
| 502 | Bad Gateway | The server received an invalid response from an upstream server while processing the request. Try again later. |
| 503 | Service Unavailable | Server is overloaded with requests. Try again later. |
| 504 | Gateway Timeout | An upstream server failed to respond on time. If your query uses max parameter, please try to reduce it. |
GET
/v1/telephony/config/devices/dectNetworks/supportedDevices{?orgId}
Log in to try the API.
Header
Query Parameters
https://webexapis.com/v1/telephony/config/devices/dectNetworks/supportedDevices?orgId=Y2lzY29zcGFyazovL3VzL09SR0FOSVpBVElPTi85NmFiYzJhYS0zZGNjLTExZTUtYTE1Mi1mZTM0ODE5Y2RjOWE
200 / OK
{
"devices": [
{
"model": "DMS Cisco DBS110",
"displayName": "Cisco DECT 110 Base",
"numberOfBaseStations": 2,
"numberOfLinePorts": 20,
"numberOfRegistrationsSupported": 10
},
{
"model": "DMS Cisco DBS210",
"displayName": "Cisco DECT 210 Base",
"numberOfBaseStations": 250,
"numberOfLinePorts": 1000,
"numberOfRegistrationsSupported": 30
}
]
}